Installing the remote control batteries
1
Open the battery compartment on the back of the
remote control.
2
Install two AAA size batteries as shown. Make sure
the “+” and “–” terminals are oriented correctly.
3
Replace the cover.
Using the remote control
Hold the remote control within an angle range of about
30° from either side of the remote sensor. The remote
control range is about 23 feet (7m) from the VCR.
Point the front of the remote control directly at the front
of the VCR.
✔
• Do not mix different types
of batteries, or mix an old
and a new battery.
• Remove and replace
weak batteries. Weak
batteries can leak and
damage your controller.
Dispose of batteries
properly; never throw
them into a fire.
6
5
Daewoo Video Cassette Recorder User’s Guide
Daewoo Video Cassette Recorder User’s Guide
Overview of the equipment,
continued
Overview of the equipment,
continued
13
EJECT
Press to eject a video cassette from the
compartment.
14
CH/TRACKING
(Up / Down)
Press to change the channel (channels stored in
memory only) or to adjust the tracking.
15
SLOW
(Up / Down)
Press to allow slow-motion playback.
16
INPUT
Press to select between the VCR tuner and the
Audio/Video Input jacks. (auxiliary).
17
FF
Press to fast forward a video cassette.
18
CM SKIP
Press during playback mode to skip commercials or
program segments.
19
TV/VCR
Press to select the TV or VCR tuner.
20
PROGRAM
Press to go directly "TIMER RECORDINGS" in MENU.
21
DISPLAY
Press to display the tape counter, clock and status
mode on the TV screen.
22
CHILD LOCK
Press to disable VCR usage or to protect set timer
recordings, the unit can be locked so that the
buttons on the VCR or remote control don't work.
23
ATR
Press to remove any streaks from the picture
automatically.
