background image

30

Daewoo Video Cassette Recorder User’s Guide

29

Daewoo Video Cassette Recorder User’s Guide

Using advanced features,

continued

- Select OFF if you want the VCR to remain in the TV

mode. This is useful if you watch your VCR on the
TV’s video input and you don’t want your
antenna/cable signal interrupted by the VCR. 

Searching a cassette tape for programs (indexing)

When you record a programs, the VCR places an index

mark at the start of the recording. To search for an index

mark: 

1

Press MENU to display the menu.

2

Press 4 to choose Functions.

3

Press 3 to choose Index Search.

4

If you want to search through a certain number of

index marks, press two number buttons to enter the

number of marks you want to search. Press CLEAR

on the remote to correct an entry.

5   

Press REW to search backward or FF to search

forward. The VCR will locate your index mark and
begin playback. If you did not enter a specific index
number, the VCR will locate the next index mark and
begin playback. Press STOP to stop index searching. 

Searching with the tape counter (go- to search)

You can mark a segment of the video cassette with the

tape counter that will help you easily locate the segment

later.  

1

Press MENU to display the menu.

!

• If two recordings overlap, the
index mark for the second
program will be erased.
Therefore, when you use the
index feature to find the second
program, the VCR will skip over
it. 

• If you record multiple programs
in one recording session, the
VCR will only find the index mark
that was placed on the video
cassette tape when the recording
session began.

Some index marks  that may

be missed by the VCR :

• A mark too close to your
location on the tape.

• The mark at the beginning of a
recorded segment of five minutes
or less.

• The first index mark on the tape
when you start at the beginning
of the tape.

Using advanced features,

continued

3

Press 2 repeatedly to select Hi-Fi, Linear, or Mix

.

4

Press Menu twice to exit the menu system.

Play the tape automatically

This feature allows the VCR to automatically start playing
when you insert a tape with the safety tab removed.

1

Press MENU to display the menu.

2

Press 4 to choose Functions

3  

Press 1 to switch between ON and OFF

-

Select ON if you want a tape with its safety tab
removed to start playing automatically when the tape
is inserted.

-

Select OFF if you do not want a tape with its safety
tab removed to start playing automatically. 

Switch the VCR to TV or VCR mode automatically

This feature controls whether the TV/VCR switch changes
automatically to the VCR mode when the VCR is turned
on. 

1

Press MENU to display the menu.

2

Press 4 to choose Functions

3  

Press 2 to switch between ON and OFF

- Select ON if you want the VCR to switch to the VCR

mode when the VCR is turned on or a cassette is 
inserted. This only applies if you connect the ANT.IN
and RF OUT jacks of your VCR and TV and watch 
your VCR on channel 3 or 4 of your TV.   

Содержание DV-T87N























Отзывы: