Daewoo DTY-25G1, Инструкция по эксплуатации

Страница: 13 / 20

12
The MODE button is used to change the sound mode. During
a stereo transmission, pression the button will change from
stereo to mono.
Pressing this button again will change it back to stereo.
During a bilingual programme transmission, pressing the
MODE button will change the language to the sound channel.
Pressing again will change it back to the main channel.
There may be case of stereo broadcasts where excessive
noise will be heard due to weak incoming signal. You may be
able to eliminate this noise by selecting the MONO mode.
MODE
You can prevent the use of the TV set without the remote con-
trol.
The set is child-locked after switching off the set by pressing
the TIME, MODE, TELETEXT(
), POWER button ( ) in
sequence on the remote control within 5 seconds. The child-
lock function is indicated by flashing the STAND-BY INDICA-
TOR. The set can only be switched back on using the remote
control.
CHILD LOCK
Pressing the TIME button, the current time is displayed on the
screen during 5 seconds. If the programme you are watching
has no Teletext transmission, no time will be displayed.
TIME