TIMER
CLOCK
1
2:20
WAKE UP TIME --:--
ACTIVATE YES
WAKE UP PROG. P 45
TIMER
CLOCK 12:20
WAKE UP TIME
1
7:00
ACTIVATE YES
WAKE UP PROG. P 45
In the MAIN MENU, Select TIMER menu.
SETTING THE CLOCK
Press the OK button on the CLOCK line.
Set the hours and minutes with the NUMBER buttons 0..9 Press
the OK button to complete. The clock will start.
Note that if you turn the TV off with MAIN POWER button, the
clock setting is lost and must be reset if necessary.
SETTING THE WAKE UP TIME
Set WAKE UP TIME in a same way to the above for CLOCK.
Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT buttons.
When ACTIVATE is "YES", the function is enabled.
Set WAKE UP PROG using the NUMBER buttons 0..9 or
UP/DOWN buttons.
When WAKE UP TIME operates, the set will switch on to this
programme number.
TIMER
By pressing the SLEEP button repeatedly, you can select one
of the following setting:
0->30min. ->60min. ->90min. ->120min. ->0
After SLEEP time is set, the remaining time become “0”, and
then the TV receiver is turned off automatically.
Automatic Switch-Off in No broadcast Signal
If a broadcasting signal is not present for about 5-30 minutes,
the set will be automatically turned off.
In AV mode, however, this function dose not operate.
SLEEP
The RECALL button is used to display the current status: pro-
gramme number, station name and clock.
This display appear for 5 seconds unless any button is
pressed.
RECALL
11
Содержание DTY-25G1
Страница 1: ...Instruction Manual Colour Television DTY 25G1 DTY 29G1 ...
Страница 19: ...MEMO ...
Страница 20: ...P N 48586775E10A R0 ...