26
Chapter 6 : Adjusting the Sound
Setting “SURROUND” function
You can hear surround sound when stereo broadcasting is receiving or external input sound is stereo.
1
With the TV turned on, press the MENU button until “SOUND” menu will be displayed.
2
Use the
V
V
CH
W
W
buttons select “SURROUND” item.
3
Use the
C
VOL
B
buttons turn on/off the function.
Adjust Bass or Treble
1
With the TV turned on, press the MENU button until, “SOUND” menu will be displayed.
2
Use the
V
V
CH
W
W
buttons select “Bass or Treble” item.
3
Press the
C
VOL
B
buttons to adjust the level.
Adjusting the Balance
1
With the TV turned on, press the MENU button until “Sound” menu will be displayed.
2
Use the
V
V
CH
W
W
buttons select “Balance” item.
3
Press the VOL
B
button to decrease the left speaker volume.
4
Press the
C
VOL button to decrease the right speaker volume.
5
Press the MENU button twice or wait few seconds to return to normal TV viewing.
6
Your setting will remain intact until you change it. Your TV will then automatically reproduce either
stereo or monaural sound, whichever is broadcast.
About AVC
This function performs an Automatic Volume Control Function. The
sound signal conditions coming out of TV stations are different from each
other. Some signals are intense and other not. When the AVC is on,
uniform sound can be ensured regardless of the conditions of TV station.
Pressing
C
VOL VOL
B
Bass
Lower(-) )
Control the level of low tone components of the sound
Treble
Lower(+) Higher(-)
Control the level of high tone components of the sound
Selection
Remark
