25
Chapter 6 : Adjusting the Sound
C H A P T E R
6
Adjusting the Sound
Selecting stereo/SAP
The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature
allows you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio
Program) used to transmit a second language of other audio information. If your TV receives a
stereo sound(or SAP) broadcast, when the TV is turned on, select other channel or press the
RECALL button on the remote control the word “Stereo”(or “SAP”) is displayed on the screen.
Listening to stereo sound
1
With the TV turned on, press the MENU button until “Sound” menu will be displayed.
2
Use the
V
V
CH
W
W
buttons select “Audio Mode” item.
3
Press the
C
VOL
B
buttons repeatedly until: “Stereo” is displayed.
4
Press the button twice or wait few seconds to return to normal TV viewing.
5
Your setting will remain intact until you change it. Your TV will then automatically
reproduce either stereo or monaural sound, whichever is broadcast.
Listening to second Language
1
Follow steps 1~2 in “Listening to stereo sound” above.
2
Press the
C
VOL
B
buttons repeatedly until: “SAP” is displayed.
3
Press the MENU button twice or wait few seconds to return to normal TV viewing.
4
If a SAP broadcast is received, you will hear only the second language from the speaker.
Note
If a broadcast signal is weak, it may cause noise and hum in stereo sound. Please select the
Mono mode, the noise and hum should be reduced.
