10
Chapter 3 : Adjusting Video Settings
Returning to the factory settings
If you would like to return to the original video settings, as they were calibrated at the factory, fol-
low these steps :
1
With the TV on, press the MENU button. Then “Video” menu will appear.
2
Select the “Settings” item by use of the
W
CH
V
buttons. Then Press the
C
VOL
B
buttons to set
the “Settings” to ‘Standard’ or ‘soft’.
The TV will remember the ‘User’ settings you had previously chosen. When you set “Settings” to
‘User’ again, your previous User settings will be restored.
Descriptions of video settings
The Contrast setting controls the relation between the light and black areas of the screen. If the light
areas are too bright and are losing details, press the
C
VOL button; if the picture is gray and lacks
contrast, press the VOL
B
button.
The Brightness settings controls the overall amount of light in the picture. If the picture is too bright,
press the
C
VOL button; if the picture is too dark, press the VOL
B
button.
The Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple
vertical lines at the edges of an object, press the
C
VOL button; if the vertical edges of on-screen
objects are fuzzy, press the VOL
B
button.
The Color setting controls the intensity of color. If the color is over-saturated, press the
C
VOL but-
ton; if the color is washed out, press the VOL
B
button.
The Tint setting controls the relationship of red and green in a picture. Tint is especially noticeable
in flesh tones. If flesh tones seem too red or purple, press the VOL
B
button; if flesh tones are too
green, press the
C
VOL button.
401E101-R0 2005.4.4 11:34 AM 페이지10
