Daewoo DTM-2930MP, Руководство по обслуживанию, Страница: 34 / 66

1C DESCRIPTION
1.4 FEATURES
Analogue Video Processing (all versions)
• Multi-standard vision IF circuit with alignment-free PLL demodulator
• Internal (switchable) time-constant for the IF-AGC circuit
• Switchable group delay correction and sound trap (with switchable centre frequency) for the
demodulated CVBS signal
• DVB/VSB IF circuit for preprocessing of digital TV signals.
• Video switch with 2 external CVBS inputs and a CVBS output. All CVBS inputs can be used as Y-input
for Y/C signals. However, only 2 Y/C sources can be selected because the circuit has a chroma inputs. It
is possible to add an additional CVBS(Y)/C input (CVBSx) when the YUV interface and the RGB/YPRPB
input are not needed.
• Automatic Y/C signal detector
• Adaptive digital (4H/2H) PAL/NTSC comb filter for optimum separation of the luminance and the
chrominance signal.
• Integrated luminance delay line with adjustable delay time
• Picture improvement features with peaking (with switchable centre frequency, depeaking, variable
positive/negative peak ratio, variable pre-/overshoot ratio and video dependent coring), dynamic skin
tone control, gamma control and blue- and black stretching. All features are available for CVBS, Y/C and
RGB/YPBPR signals.
• Switchable DC transfer ratio for the luminance signal
• Only one reference (24.576 MHz) crystal required for the TCG m-Controller, digital sound processor,
Teletext and the colour decoder
• Multi-standard colour decoder with automatic search system and various “forced mode” possibilities
• Internal base-band delay line
• Indication of the Signal-to-Noise ratio of the incoming CVBS signal
• Linear RGB/YPBPR input with fast insertion.
• Tint control for external RGB/YPBPR signals
• Scan Velocity Modulation output. The SVM circuit is active for all the incoming CVBS, Y/C and
RGB/YPBPR signals. The SVM function can also be used during the display of teletext pages.
• RGB control circuit with ‘Continuous Cathode Calibration’, white point and black level off-set adjustment
so that the colour temperature of the dark and the light parts of the screen can be chosen independently.
• Contrast reduction possibility during mixed-mode of OSD and Text signals
• Adjustable ‘wide blanking’ of the RGB outputs
• Horizontal synchronization with two control loops and alignment-free horizontal oscillator
• Vertical count-down circuit
• Vertical driver optimized for DC-coupled vertical output stages
• Horizontal and vertical geometry processing with horizontal parallelogram and bow correction and
horizontal and vertical zoom
• Low-power start-up of the horizontal drive circuit Analogue video processing (stereo versions)
Analogue video processing (stereo versions)
• The low-pass filtered ‘mixed down’ I signal is available via a single ended
Analogue video processing (mono versions)
• The low-pass filtered ‘mixed down’ I signal is available via a single ended output stage
Digital Video Processing (some versions)
• Double Window mode applications. It is possible to display a video and a text window or 2 text
-32-