Daewoo DTD-7000, Руководство пользователя

Страница: 57 / 125

18
Selecting a base to use
If your handset has been registered to more than one base you can select which
one it uses.
1. Press . Press or until REGISTER is displayed then press .
2. Press or until SELECT BASE is displayed then press .
3. All bases that your handset is registered to will be displayed, e.g. BASE 1 2 3 4.
The base that you are currently registered to will flash.
4. Enter the number of the base you want or press or to select AUTO.
When the handset locates the selected base you will hear a confirmation tone.
Switchboard use
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to get an outside line. So
that the switchboard has time to pick up an outside line, you may also need to add
a Pause after the access code. A Pause lasts 3 seconds. You can pause dialling at
any time by pressing the button.
To insert a pause
Begin storing a number and press and hold where a pause is needed. P is
shown in the display. You may need to insert a pause when storing international
dialling codes, charge card numbers and with other telebanking facilities.