43
2) Press
key to confirm. Use keypad to enter the PIN code ( the default PIN is 0000).
3) Press
key to confirm. Use the keypad to enter the new PIN (4 digits from 0-9).
4) Press
to confirm. Use the keypad to enter the new PIN again and press
key to
confirm.
If you’ve entered wrong PIN, you will hear an error tone and the display will return to the
previous menu.
To set base to default settings
This function allows the user to restore the base settings to the factory default:
The Caller Display (CID) and Outgoing Calls list will be erased, but the phonebook memories and TAM
settings will remain unchanged.
1) Press
key, then use
∧
or
∨
key to select
BS DEFAULT
item. Press
key to confirm.
2) The user will be promoted to enter PIN code. Use keypad to enter PIN code. (Default PIN is 0000)
3) Press
key to confirm. If the PIN code is validated all base settings will be returned to the
factory default.
Handset Menu Function 4: HS settings
The user is able to change a number of the settings for the handset to their own individual preferences. Press
key and use
∧
or
∨
key to select
HS SETTINGS
. Then you can do below:
ALARM
You can set an alarm function on the handset, to give an alert at a programmed time of every day.
1) Press
key, the first sub-menu is
ALARM
item.
2) Press
key to enter. Press
∧
or
∨
key to select
ON
or
OFF
, select of
ALARM OFF
will turn
the alarm off, and the user is dropped back to the
ALARM
menu, select of
ALARM ON
option will
turn the alarm on, and the user will be requested to set the alarm time.
3) After select
ON
, press
key to start the settings of alarm, 12-
00 displayed with “12” flashing,
4) Press
∧
or
∨
key to change the hours, press
key to confirm, and setup the minutes and
AM/PM by the same way.
5) After you set the alarm time, the user will be presented with a further option to select to
SNOOZE
ON
or
SNOOZE
OFF
to enable or disable the snooze function on the alarm.
6) Press
key to confirm your selection. When the alarm is set, the
will appear on the top
of the display.
Startup alarm:
In idle state, the alarm will ring on the time you have set.
Intermit alarm:
During the alarming, you can switch it off by pressing any key of the handset, or
when a call comes, the alarm will be intermitted too.
Close alarm:
Re-enter the alarm setting menu option and select
OFF
.
Notes:
1) If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about nine times, with
the alarm icon continuing to flash. During the alarming, press any key except
key to intermit
alarming, and will begin to ring after 5 minutes.
2) If the SNOOZE is set OFF, the alarm will sound for 45 seconds once.
