Daewoo DTD 3500, Руководство пользователя

Страница: 27 / 64

27
6. Press OK key to confirm, the code will be stored and a tone sounded.
 BASE DEFAULT
This function allows the user to restore the base setting to the factory default.
1. Press OK key, then using ▲ or ▼ key to select BS DEFAULT item.
2. Press OK key to confirm.
3. The user will be prompted to enter the PIN code, the display shows PIN? , then press numerical keys to
input code (default as 0000).
4. Press OK key to confirm. If the PIN code is validated all base settings will be returned to the factory
default.
Handset Menu function 4: HS SETTINGS
The user is able to change a number of the settings for the handset to their own individual preferences. Press
OK key and use ▲ or ▼ key to select HS SETTINGS . Then you can do below:
 ALARM
The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a programmed
time of every day.
1. Press OK key, the first sub-menu is ALARM item.
2. Press OK key to confirm.
3. Press ▲ or ▼ key to select ON or OFF , selection of OFF will turn the alarm off, and the user is dropped
back to the ALARM menu, selection of ON option will turn the alarm on , and the user will be requested
to set the alarm time.
4. After select ON , press OK key to start the settings of alarm, “12-00” displayed with “12” is blinking.
5. Press ▲ or ▼ key to change the hours, press OK key to confirm, use the same method to select minutes,
AM/PM.
6. After select the alarm time, press OK key, the user will be presented with a further option to select to ON
or OFF to enable or disable the snooze function on the alarm by using ▲ or ▼ key.
7. Press OK key to confirm your selection.
8. When the alarm is set, the will appear on the top of the display.
Notes:
1. In idle state, the alarm will ring at very sharp time you have set.
2. During the alarming, you can switch it off by pressing any key of the handset, or when a call comes, the
alarm will be intermitted too.
3. Re-enter the alarm setting menu option and select OFF .
4. If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about nine times, with the
alarm icon continuing to flash. During the alarming, press any key except and key to intermit
alarming, and will begin to ring after 5 minutes.
5. If the SNOOZE is set OFF, the alarm will sound for 45 seconds once.
 RING SETUP
The user is able to change the handset ringing on Internal calls and External calls. There are 10 ringer
melodies and 5 different volume levels can be set.
1. Press OK key, then using ▲ or ▼ key to select RING SETUP item.
2. Press OK key to enter.
3. Press ▲ or ▼ key to select the INT RING and EXT RING setup.