EN
30
* BASE DEFAULT
This function allows restoring the base setting to the factory default.
1) Press
key, then press
or
key to select
BS DEFAULT
item.
2) Press
key to confi rm.
3) The user will be prompted to enter the PIN CODE, the display shows
PIN?
, then press
numerical keys to input code.
4) If the PIN code is validated all base settings will be returned to the factory default.
Handset Menu function 4: HS SETTINGS
It is able to change a number of the settings for the handset to their own individual
preferences. Use
or
key to select
HS SETTINGS
. Then you can do below:
* ALARM
It is able to set the alarm on the handset and adjust the alarm settings.
1) Press key, the fi rst sub-menu is
ALARM
item.
2) Press key to confi rm.
3) Press
or
key to select
ON
or
OFF
, and press to confi rm .Selection of
ALARM OFF
will turn the alarm off , and the user is dropped back to the “
ALARM
” menu. Selection
of
ALARM ON
option will turn the alarm on; the user will be requested to set the alarm
time.
4) After select
ON
, press
key to start the time settings of alarm, 00-00 displayed and
the hour “00” fl ashing,
5) Press
or
key to edit the alarm time.
6) Press
key, the user will be presented with a further option to select to
SNOOZE ON
or
SNOOZE OFF
to enable or disable the snooze function on the alarm.
7) Press
key to confi rm your selection. And the alarm icon will show on LCD.
· Startup alarm:
In idle state, the alarm will ring at very sharp hour you have set.
· Intermit alarm:
During the alarming, press any key except key, and will begin to ring after 6 minutes.
When a call comes, the alarm will be intermitted too.
· Close alarm:
Press key to close alarm or enter alarm setting state, select
OFF.
* RING SETUP
It is able to change the handset ringing on internal calls and external calls. There are 10
ringer melodies and 5 diff erent volume levels can be set.
1) Press
key, then press
or
key to select
RING SETUP
item.
2) Press
key to enter.
