Daewoo DTC-2987, Инструкция по эксплуатации

Страница: 12 / 22

The desired function is selected by moving the cursor with DOWN/UP buttons.
The LEFT/RIGHT buttons are used to adjust the analog level.
1. BRIGHTNESS
Adjust for natural brightness if the picture appears too dark
or light.
2. CONTRAST
This is used to obtain satisfactory range of the tone between black and white. A bright
room will need the higher contrast setting than a dark room.
3. COLOR
Adjust the strength of the color as preferred.
4. SHARPNESS
This is used to change the sharpness degree of the picture. It is the most suitable
when watching programmes from the external source such as a VCR.
5. TINT; ONLY NTSC
This is used to adjust tint of the NTSC color picture.
6. B/B (BACK BLUE)
When there is no signal and B/B is ON, the display is blue. In case B/B is OFF by
pressing LEFT or RIGHT button, the noise signal will be appear on the screen.
11
PICTURE (SUB MENU)
PICTURE FAVORITE
BRIGHT 60 |||||||||||
CONT 90 ||||||||||||||||
COLOR 80 ||||||||||||||
SHARP 60 |||||||||||
TINT 0 ||
B/B ON
1. BASS
Place the cursor at BASS by using DOWN/UP buttons
and adjust the sound of the low frequency band by
using LEFT/RIGHT buttons.
2. TREBLE
Place the cursor at TREBLE and adjust it as BASS mode.
It is used to adjust the high frequency band.
3. BALANCE
This is used to control the strength of left or right each SPEAKER by using
LEFT/RIGHT buttons.
SOUND (SUB MENU)
SOUND MEMORY
BASS 70
||||||||||||
TREBLE 50
|||||||||
BALANCE 0
||