Daewoo DSP-4210GM, Руководство по обслуживанию

Страница: 3 / 36

Service manual SP-110
- 2 -
1M / 500V DC
1. SAFETY & PRECAUTIONS
SAFETY CHECK AFTER SERVING
Examine the area surrounding the repaired location for damage or deterioration. Observe that screw,
parts and wires have been returned to original positions. Afterwards, perform the following tests and
conform the specified values in order to verify compliance with safety standards.
1-1. Insulation resistance test
Confirm the specified insulation resistance between power cord plug prong and externally exposed
parts of the set (video and audio input terminals, speaker out terminals etc) is greater than values
given in table 1 below.
1-2. Dielectric strengthen test
Confirm specified dielectric strengthen between
power cord plug prongs and exposed accessible
parts of the set (video and audio input terminals,
speaker out, etc) is greater than values given
table 1 below.
1-3. Clearance distance
When replacing primary circuit component, confirm specified clearance distance (d), (d’) between
soldered terminals (see Fig1), and between terminals and surrounding metallic parts. See table 1
below.
Rating for selected areas (table 1)
Insulation Dielectric Clearance
Resistance Strength Distance(d),(d’)
100V Japan 3
110 to 130V USA &Canada - 900V AC 1min 3.2
Europe 6(d)
Australia 8(d)
Latin America (a : Power cord)
* Class model only
NOTE
This table is unofficial and for reference only. Be sure to confirm the precise values for your particular.
AC Line Voltage
110 to 130V
200 to 240V
10M / 500V DC 4kV AC 1min.
1kV AC 1min.
Region