Daewoo DSJ-6000LN, Инструкция по эксплуатации, Страница: 59 / 74

Receiving Stereo or SAP Mode Programs
-57-
When transmission signal is weak or broadcasting condition is not good, sound might be cut off temporarily.
This type of malfunction is not caused by TV set. In this case, press “MTS” button and shift the mode into “Mono”.
The Second Audio Program (SAP) settings offers you the option of listening to either of two separate Audio programs, such as a second
language broadcast.
POWER
VCR
T V
CATV
RECALL
REW
REC
PLAY
STOP PAUSE
MENU
CH
FF
CH
SCREEN
MODE
ADD/ERASE CAPTION
TV/CATV
SLEEP MTS
SOUND
MODE
SCREEN
SIZE
DOLBY
SOUND
VOL
MUTE
PREV
VOL
100
VCR
CATV
TV
PC/DTV
TV/VIDEO
When Stereo Broadcasting is on
Press the "MTS" button
When the program transmission is in stereo mode. select
“stereo” to receive the stereo sound.
Each time the button is pressed, the menu will change in
the following sequence from Stereo
Forced Mono.
MTS
Press the “MTS” button.
Open the remote controller lid, and press the “MTS” button.
When the broadcasting station had initially set-up a certain language,
the unit will automatically detect the program as it is set-up.
Each time you press the button, the menu will change in the following
sequence Stereo
Mono Sap
MTS
When the reception signal is low, the
broadcasting may be momentarily cut off
and its sound quality may not be as good as
when the receiving signals are strong. This
does not mean the product is defective. In
this case, press the "MTS" button, and
change the sound mode to "Forced Mono".