51
2
OUTDOOR UNIT
¡
DSB-090L/DSB-120L/DSA-100L/DSA-120L
PROCEDURES PHOTOS
1.Stop the air conditioner and disconnect the wire from Indoor Unit to
Outdoor Unit.
2. Dissemble the case. (Fig 1~2)
!
Remove the Top Panel. (Lossen two screw and remove six hook)
@
Remove the Front Cabinet. (Loon four screw and four hook)
#
Remove the Side Cabinet and Back Cabinet. (Loosen eight screw)
3. Removing the Propeller Fan. (Fig 3)
!
Loosen the Nut for fixing the propeller Fan.
@
Remove the Plain Washer.
#
Remove the Propeller Fan.
4. Removing the Motor ODU. (Fig 4)
!
Loosen four screw at Bracket Motor.
@
Disconnect the wire at Control Panel and remove Motor ODU.
5. Removing the Dual Capacitor. (Fig 5)
!
Disconnect the wire at Control Panel.
@
Loosen a screw at Clamp Capacitor.
#
Remove the Dual Capacitor.
6. Removing the Over load Protector. (Fig 6~7)
!
Loosen a Hex Nut at Terminal Cover.
@
Remove the Terminal Cover.
#
Remove the wire at Over load Protector.
$
Remove the Over load Protector.
Fig 1
Fig 2
Fig 3
Fig 5
Fig 4
Fig 6
Fig 7
