Utilities
46
Auto clock
Set Current
On time
On time setup
Off time
Off time setup
On time PR
On time volume
Time zone
Daylight saving
On
12 : 00 A.M.
On
12 : 00 A.M.
On
12 : 00 A.M.
DTV 0
NSW/ACT
Off
4. Setting the Off time / Off time Setup
• Move to
Off Time
in the
Time
menu
• Select the Off time to “On” using the ”
C
VOL
B
” button.
6. Press the “SLEEP” button
• By pressing the “
SLEEP
” button on the remote controller repeatedly,
you can select one of the following settings:
Sleep Timer: Off => 30 => 60 => 90 => 120 => Off
• The set will turn off after the time you select.
• Move to
Off time setup
with the “
W
PR
V
“ buttons.
• To go to
Off time setup
, press the ”
C
VOL
B
” buttons.
• Place the cursor to
Clock
with ”
C
VOL
B
” buttons.
• Set the
Clock
with the “
W
PR
V
“ buttons and then press
the
Menu
button to complete.
• Place the cursor to
Minute
with ”
C
VOL
B
” buttons.
• Set the
Minute
with the “
W
PR
V
“ buttons and then
press the
Menu
button to complete.
• Place the cursor to
AM/PM
with ”
C
VOL
B
” buttons.
• Set the
AM/PM
with the “
W
PR
V
“ buttons and then
press the
Menu
button to complete.
Note. :
• Information of Auto clock is required to DTV(DVB-T) signal.
• If an active signal is not present for about 30 minutes, the set will automatically turn to ST-BY mode.
Auto clock
Set Current
On time
On time setup
Off time
Off time setup
On time PR
On time volume
Time zone
Daylight saving
On
12 : 00 A.M.
On
12 : 00 A.M.
On
12 : 00 A.M.
DTV 0
NSW/ACT
Off
Auto clock
Set Current
On time
On time setup
Off time
Off time setup
On time PR
On time volume
Time zone
Daylight saving
On
12 : 00 A.M.
On
12 : 00 A.M.
On
3 : 15 P.M.
DTV 0
NSW/ACT
Off
5. Setting the Time zone / Daylignt saving
• Current time depends on the time zone and daylight
saving that you belongs to.
Auto clock
Set Current
On time
On time setup
Off time
Off time setup
On time PR
On time volume
Time zone
Daylight saving
On
12 : 00 A.M.
On
12 : 00 A.M.
On
3 : 15 P.M.
DTV 0
NSW/ACT
Off
