Daewoo DLA-32C7LAB, Руководство по обслуживанию

Страница: 10 / 73

Service Remote Controller
-10-
2) Service Mode Data
To enter SERVICE MODE,
A. Press “<VOL” -> “MUTE” -> “DISPLAY” -> “MUTE” button of remote controller(R-55M15)
B. Press “S9” button of SERVICE REMOTE CONTROLLER.
Content Default Value Description
Pw388_1 Sub Bias 32
For BRIGHTNESS adjustment (All inputs)
Sub Gain 74
For CONTRAST adjustment (All inputs)
Bias R 35
For R BRIGHTNESS adjustment (All inputs)
Bias G 32
For G BRIGHTNESS adjustment (All inputs)
Bias B 32
For B BRIGHTNESS adjustment (All inputs)
Gain R 36
For R CONTRAST adjustment (All inputs)
Gain G 32
For G CONTRAST adjustment (All inputs)
Gain B 52
For B CONTRAST adjustment (All inputs)
Pw338_2 Sub Bias 32
For Bias adjustment of SUB PICTURE(PIP)
Sub Gain 64
For Gain adjustment of SUB PICTURE(PIP)
PwFrontEND_1 R Offset 411
G Offset 408
B Offset 393
R Gain 280
G Gain 269
B Gain 269
Y Offset 435
Pb Offset 534
Pr Offset 544
Y Gain 352
Pb Gain 369
Pr Gain 379
RGB Auto Cal >> Ready
YPrPb Auto Cal >> Ready
PwFrontEnd_2 AV Brt 128
AV Brightness adjustment
AV Cont 128
AV Contrast adjustment
AV Color7.5 IRE On
AV Color adjustment
COMP_SOG_TH 4
Component Sync. Threshold value adjustment
Msp46X0 Sc pScale 0
Prescale adjustment for external input (AV, Component, PC etc.)
Fm pScale 12
FM/AM prescale adjustment
HDMI pScale 32
BBE level control(disable)
BBE Level 30
HDMI prescale adjustment
Mvoice Level 12
Mvoice level control
Audio Delay 15
Sound delay control
Stereo ID 10
Stereo check
Misc DECODER Version : MP 200#-##-##-##
MCU Version: LPP 200#-##-##-##
Tst Ptrn AT >>
Tst Ptrn MA >>
TV Auto Off On
EDID Write Ready
*RGB offset values will be set by
executing “RGB Auto Cal” in
service mode.
*YPbPr offset values will be set by
executing “YPbPr Auto Cal” in
service mode.
*The automatically set offset values
may different from the default
value depend on B/D. However,
the main B/D should be replaced
or contact R&D center in Korea if
the OFFSET values differ more
than
20 from default value.