Daewoo DKCC350, Инструкция по эксплуатации

Страница: 5 / 22

5
Indicator Lights:
Status Indicator light
Charging Red light ON
Fully Charged Blue light ON
Safety Switch ON Blue light flashes 5 times
Safety Switch OFF Red and Blue light flashes 2 times
Device working Blue light turns ON
Battery low power Red light turns on for 10 seconds
Troubleshooting:
Incident Indicator status Possible reason of
failure
Solution
Device not working
after installing the
machine
Red and Blue lights
ON
Jar not properly
installed
Install the jar in
accurate position and
align with the
magnetic sensors
Red light ON Motor is damaged or
stuck
Send to maintenance
store for inspection
Charging Red light not turning
ON
Please check
connection of
charging port and
power cable
Bad smell from the
motor at first time
use
It is normal for new
motor
Go back to your
dealer to get this
checked out.
Blade stuck The blade is stuck
with food
Switch off the
chopper, take out the
chopper main body
and remove the food.
Continue the process
with less food inside
4). Cleaning & Maintenance
1. Clean the chopper body, blades, and cup after use with water
2. Rinse the device with water and wipe out with a soft, dry cloth. When cleaning, put some
detergent in the water and clean with warm water.
3. Do not touch the blades with the hands directly to avoid injury.
4. Do not use abrasive or corrosive cleaning agents for cleaning
5. Do not put any parts of the device in high temperature sterilizer.
6. Dry all parts of the device after cleaning and store the chopper in a secure place,
out of reach of children.
7. Charge the device at least 1 time for every 3 months if not using the machine for a long time.
EN