Daewoo DKCC350, Инструкция по эксплуатации

Страница: 4 / 22

4
Install the blades into the jar, be careful and hold the blades at the top part to install. Thereafter
put the food inside the jar.
The blades are very sharp and handle with care. Hold the knife blade at the
plastic top of the shaft and keep away from the metal cutting edge, when
handling and cleaning.
Put the chopper main engine body on top of the jar and make sure it is in the right position by
matching the magnets of the food compartment. When it is installed properly, a blue indicator
will flash 5 times, and thereafter press the ON/OFF button on top to chop the food.
The blade may be stuck if it is overloaded, take food out and repeat the procedure again.
The chopper will stop automatically after 30 seconds for safety reasons and protect the motor
from overheating. Repeat the process again if the food is not chopped well. After chopping well,
take out the chopper body and blades, and the chopped food from the cup. Clean the parts with
water.
WARNING!
NEVER put or immerse the chopper into water or any other liquid.
EN