32
This feature enables you to search for Index marks or specific times on your VHS
tapes.
1
While ‘Preferences‘ is selected, press [
†
] to move to the second level.
2
Use [
…
/
†
] to select ‘VCR‘.
3
Press [ENTER] to display the submenu.
4
Select ‘Index+’, ‘Index–’ or ‘Go to Zero’.
5
If you select ‘Index+’ (or ‘Index–’) and press [ENTER], your DVD R
VCR will locate your index mark and begin playback.
6
If you select ‘Go-To Search’ and press [ENTER], your DVD R VCR will wind to the position 0:00:00
and stop.
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move
…†
VCR
Index+
Index–
Go to Zero
VCR
Index+
Index–
Go to Zero
VCR
Index+
Index–
Go to Zero
Initial Setup
System Information
PREFERENCES / VCR
System Information helps service personnel identify key firmware information
about your DVD RVCR in case service is required.
System Info
Version
EP Set 1.0
Main Build
DR3-1.0.2
Micom Software
0.0.0
DVD Navigation
1.0.0
Loader Version
DVS-RA20
Instructions
Enter-Confirm Setup-Exit
Move
…†
• Some options cannot be reset, including Parental Controls, Password,
and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
If you wish, you can reset the DVD RVCR to its original factory
settings.
1
Press [SETUP].
2
Use [
œ
/
√
] to select ‘Restore Defaults‘.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [
…
/
†
] buttons to select
‘Yes‘ and press [ENTER].
Restore Defaults
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
Instructions
Enter-Confirm Setup-Exit
Move
…†
Are you sure you want to restore
default settings?
Yes
No
• The VCR menu is activated only when a video cassette tape is inserted.
DF-L71D1P-UA/TA 04.11.24 11:51 PM 페이지32