12
4. Press the Volume Up(+) / Down(-) button on your Bluetooth device to adjust to the desired
volume level. Or press the button “+” to increase the volume, a beep alert sounds when
volume reach maximum level ; Press the button “-” to decrease the volume.
Notes:
1. Refer to manual of your mobile phones, tablet, PC, computer or other Bluetooth enabled
device for Bluetooth operation, since it may vary from model to model.
2. Your Bluetooth enabled device will not play the music through the speakerphone, even
if connected (linked), if the device does not support A2DP profi le.
3. If you are pairing (linking) your computer to the DBT-02 using Bluetooth, you may need
to set the speakerphone as your computer’s default sound device.
4. If the DBT-02 is left idle for about 5 minutes without linking to any Bluetooth enabled
device, it will automatically turn off to save battery power.
Using the DBT-02 as a Handsfree Bluetooth Speakerphone.
1. Link your cell phone to the DBT-028 via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the ANSWER/ PLAY/STOP/PICK
UP/HANG button on the speakerphone to switch the incoming call from cell phone to
the DBT-02 speakerphone. A short beep sound will be heard confi rming the call was
answered. Complete your call using the built-in microphone and speakerphone on the
DBT-02.
3. Adjust the volume control of unit to obtain the desired sound level.
4. To end the call, just tap the ANSWER/ PLAY/STOP/PICK UP/HANG button again on the
DBT-02. A short beep sound will be heard and the call will end. If you were playing music
from your cell phone to the DBT-02 speakerphone before answering the call, the music
will automatically resume playing when you hang up.
5. To ignore an incoming call, simply tap the ANSWER/ PLAY/STOP/PICK UP/HANG button
on the speakerphone for about 2-3 seconds, a beep sound will be heard and the call
will be ignored.
Re-linking to the mobile phone
If your mobile phone is already paired (linked) with the speakerphone, but became unlinked
even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the speakerphone and then turning it on again to re-link your cell phone. The
LED INDICATOR will fl ash three times with two short beeps and them fl ash rapidly around
2 seconds if the speakerphone and your cell phone have been re-linked successfully.
2. You can also re-link the speakerphone by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
VOLUME CONTROL
Press the button “+” to increase the volume,a beep alert sounds when volume reach maximum
level ; Press the button “-” to decrease the volume.
REMOTE CONTROL MUSIC TRACKS
Press the Play/Pause button to play or pause the track. Press the button “Next” to play the next
track. Press the button ”Prev” to play the previous track.
ENG
