9
Cyclone Essential 600W Corded Stick Vacuum
FLR00038
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug has to be removed, it
should be cut off and carefully disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
The mains lead must be connected as shown below. The wires are coloured with the following
code -
Brown wire = Live (L), Blue wire = Neutral (N).
NB
no connection must be made to the Earth (E) terminal.
•
The Blue wire must be connected to the terminal marked N or coloured Black.
•
The Brown wire must be connected to the terminal marked L or coloured Red.
•
Check that there are no cut or stray strands of wire inside the plug.
•
Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
•
If you are in any way unsure which plug or fuse to use, always refer to a qualified
electrician.
•
After replacing or changing a fuse on a moulded plug, the cover must be refitted to the
plug; the appliance must not be used without a fuse cover.
Technical Specification
Model Number
FLR00038
Supply Voltage
AC 220-240V ~ 50/60Hz
Rated Power
600W
Protection Class
II
Unpacked Weight (approx.)
2.5 Kgs
Dimensions (approx.)
370mm (l) x 135mm (w) x 220mm (h)
Vacuum (max)
16kpa
Noise Level (approx.)
75dB
Dust Compartment Capacity
1L
Connect
Brown to
Live (L)
Connect
Blue to
Neutral (N)
Ensure the outer sheath of the mains lead
is securely held by the cable clamp
