7
Cyclone Digi Flex Cordless Vacuum
FLR00041
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using Your Cyclone Digi-Flex Vacuum
1.
Right:
Grasp the vacuum cleaner firmly by
the
Handle
(9) and press the
On/off
Trigger Switch
(8) to power up the
cleaner.
1
3.
Right:
Place your foot gently on the
Motorised
Floor Tool
(16) and pull the cleaner back by the
Handle
(9) and start vacuum cleaning.
Press the
On/off Trigger Switch
(8) again at the
end of cleaning to switch the cleaner off.
Far Right
: Press the catch on the Flexi joint
(arrowed right) to release the
Aluminium Flexi
Tube
(21) so that the tube can bend in order to
clean under furniture and other close to the
ground objects.
3
4.
Left:
If the
Aluminium Flexi Tube
(21) is not
required, the
Motorised Floor Tool
(16) can
be attached directly to the vacuum as shown
left for cleaning hard to get at areas such as
stairs, car seats, etc.
4
2.
Left:
During use, on the
Information
Screen
(25), press the
Eco Speed
(33) to
lower the vacuum speed/suction or
High
Speed
(28) to increase speed/suction. The
Speed/Suction Indicator
(34) will move to
show the current speed/suction level (low
to high).
2
33
28
