6
Cyclone Digi Flex Cordless Vacuum
FLR00041
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using Your Cordless Vacuum Cleaner
The Motorised Floor Tool (16)
3.
Place the brush bearing (c.) onto the end of the
Hard Floor Roller
(23) as shown above
left. Once in place, insert the
Hard Floor Roller
(23) into the
Motorised Floor Tool
(16) as
shown above right.
3
c.
1.
Before using the
Motorised Floor Tool
(16),
first choose the appropriate brush type for
the floor type being cleaned:
Select the
Carpet Brush
(22) for vacuum
cleaning carpets, rugs, etc.
Select the
Hard Floor Roller
(23) for
cleaning vinyl, laminate, tiled floors, etc.
1
2.
To change the brush attachment,
slide the catch (a) to the left and lift
up the brush bearing retaining clip (b)
on the underside of the
Motorised
Floor Tool
(16) as shown left.
NB
the
Carpet Brush
(22) is currently
fitted in this example.
Lift out the
Carpet Brush
(22) and the
brush bearing (c). Remove the brush
bearing from the
Carpet Brush
(22).
2
a.
b.
c.
c.
4.
Finally, hook the brush bearing retaining
clip at the front edge (d) and push down
into until it clicks into place (e) as shown
left.
The vacuum is now ready to clean hard
floors.
4
c.
d.
e.