Several hardware settings are made through the of jumper caps to connect
jumper pins(JP) on the motherboard. Refer to motherboard layout on
following page.
The jumper settings will be described numerically such as
°
a
1 - 2
°
b
,
°
a
2 - 3
°
b
f o r
connect pins 1&2, connect pins 2&3 respectively, or
°
a
O N ( S h o r t )
°
b
,
°
a
O F F ( O p e n )
°
b
JP3 : CMOS Clear
The CMOS RAM is powerd by the onboard coin-cell battery or power supply.
To clear the AC cord from the system. Short pins 2&3 for 5~10 seconds and
place jumper back to pins 1&2 position. If not the system may malfunctions.
JP4 : FWH Setting
JP5 : Keyboard Password Power-On Setting
Mother board
17
DAEWOO CT6600
JP5
KBD PWR-ON
DESCRIPTION
1-2
NORMAL
Nomal Operation without keyboard power-on
Setting when use keyboard power-on
(password, hotkey power-on, etc.)
2-3
KBD Power-On
JP4
FWH
Setting DESCRIPTION
ON
UNLOCK
When upgrading BIOS
Protection from virus, etc
(can not upgrading BIOS)
OFF
LOCK
JP3
CMOS CLEAR
DESCRIPTION
1-2
NORMAL
Setting when Normal Operation
2-3
CLEAR
Setting BIOS default value by clearing CMOS
CT6600øµ
π
Æmenual 89.6.16 11:13 AM
∆
‰¿Ã¡ˆ17
