9
36 Inch Tower Fan with Remote
Model No. COL1571
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
The
Temperature/Timer Display
(13), the
Fan Speed Display
(12)
and the
Mode Display
(14) will automatically dim after 30 seconds on both
Normal
and
Natural
modes, this is normal operation and the unit is not faulty.
The
Temperature/Timer Display
(13), the
Fan Speed Display
(12)
and the
Mode Display
(14) will automatically go out after 30 seconds on
Sleep
mode, this
is normal operation and the unit is not faulty.
Oscillation Mode
1.
Press the
Oscillate Button
(8) on the
Control Panel
(1) to
enable the fan to oscillate from side to side to blow air
over a larger area. Press the oscillate button again to stop
the oscillation.
Oscillate Symbol will illuminate on the
Mode Display
(14) when the oscillate
mode is selected.
Using the Timer
1.
Press the
Timer Button
(16)
once on the
Control Panel
(1).
2.
The
Temperature/Timer Display
(13)
will show
‘
01H
’
. Each
further press of the
Timer Button
(16) will advance the
‘on’ time in
1 hour steps to a maximum time of 12 hours.
The fan will now run for the length of time shown on the
Temperature/Timer Display
(13)
and then switch off.
Operating Instructions - Using the Remote Control
The Remote Control duplicates the controls on the
Control Panel
(1) allowing
you to control your Tower Fan remotely.
If using the Remote Control for the first time,
pull the tab from the battery compartment as
shown right:
