CB650M-BX Mother Board
2 - 8
4. Lock the base into place by inserting a pin down into the base on the both
s i d e s .
5. Gently insert the processor cartridge down into the URM, making sure the
connector on the processor cartridge and Slot 1 connector are aligned.
6. Push the processor cartridge down until it snaps into place.
7. Lock the processor cartridge into place by pushing outward on the tabs
located on both sides of the processor cartridge. The processor cartridge is
locked when the tabs snap into the holes on the side of the URM.
8. After the processor cartridge is locked into place, connect the Heatsink’s top
bar to the base.
P rocessor Installation Overview
Figure 2-5. Processor Installation Overview
Processor Installation
O v e r v i e w
1. Mount the URM for the
P r o c e s s o r .
2. Mount the (optional) he-
atsink support base onto
the system board.
3. Slide the Processor into
the URM.
4. Lock the Processor into
the URM using the tabs.
5. Slide in the Heatsink Top
Bar, then insert the pins
to lock it in place.
CB650M-BX(1,2¿Â) 00.5.12 2:8 PM
∆
‰¿Ã¡ˆ2-8
