9
HOW TO INSTA L L
Location
Install the refrigerator in a convenient location aw ay from extreme heat and
cold. Allow at least 6cm clearance between the refrigerator and side wall so
that the door may open for a fully usable interior and the refrigerator may
h ave good air circulation. The refrigerator is not designed for recessed
i n s t a l l a t i o n .
■
Select a strong and level floor.
■
Keep 6cm of space betwe e n
the refri g e rator and the wa l l s.
Leveling
L evel the refrigerator so that it rests solidly on the floor without ro ck i n g .
There are two leveling feet at each front corner. Turn to the left to raise a
c o r n e r, to the right to lower it. Use shims under the rear corners, if
n e c e s s a ry.
■
If you want the refri g e rator door to close natura l l y, adjust the leveling feet so
that the front of the refri g e rator is raised by 5mm.
■
If you want the refri g e rator to remain motionless when open, adjust the leve l i n g
feet so that all four corners are leveled with each other.
All packing materials used to ensure safety during tra n s p o rt should be
r e m oved. You must remove the tra n s p o rt safty packing and wipe off any
p o s s i ble adhesive tape residues with a petroleum-based cleaner or similar
s o l ve n t .
10
HOW TO OPERAT E
Temperature is controlled by thermostat automatically.
The Temperature Control inside the refrigerator controls the degree of
cooling for each compart m e n t .
1. Clean the refri g e rator thoroughly. Wipe the outside with a dry cloth, and the inside
with a damp cloth.
2. Set the temperature control knob at normal position.
3. Connect the power supply cord.
F r e e zer Temperature Contro l
The control has four settings fo rm
MIN to WINTER. The WINTER
mode is ava i l a ble only if atmosphere
t e m p e rature is below 10°C.
R e f r i gerator Temperature Contro l
The control has the four settings from
MIN to WINTER. The WINTER mode
is ava i l a ble only if atmosphere
t e m p e rature is below 10°C.
Starting your new refrigerator
1. TEMPERATURE CONTROL