8
Use the
Previous
(10) or
Next
(8) buttons or rotate the
Volume/Select
control (9) to scroll through
the various menu options, press the
Volume/Select
control (9) to select the desired option:
a.
Station List
–
shows a full list of DAB stations available.
b.
FullScan
–
Re-scans the DAB band for stations, press the
Volume/Select
control (9) to select re-
scan.
c.
Manual Tune
–
Enables manual DAB radio tuning. Use the
Previous
(10) or
Next
(8) buttons or
rotate the
Volume/Select
control (9) to scroll through the frequencies, press the
Volume/Select
control (9) to select the desired frequency.
d.
Prune Invalid
–
This removes unavailable stations. Use the
Previous
(10) or
Next
(8) buttons or
rotate the
Volume/Select
control (9) to select
‘
Yes
’
or ‘
No
’, press the
Volume/Select
control (9) to
select.
e.
DRC
–
Dynamic Range Control. Use the
Previous
(10) or
Next
(8) buttons or rotate the
Volume/Select
control (9) to
select ‘
High
’, ‘Low’
or ‘
Off
’, press the
Volume/Select
control (9) to
select the DRC mode.
f.
System Settings
–
press and rotate the
Volume/Select
control (9) to select:
•
Equaliser
–
press and rotate the
Volume/Select
control (9) to select:
Normal, Classic, Jazz, Pop, Rock, Speech,
My EQ, My EQ Setup.
•
Time/Date
–
press and rotate the
Volume/Select
control (9) to set:
Time and Date, Auto Update, 12/24hr,
Date Format.
•
Backlight
–
press and rotate the
Volume/Select
control (9) to set the LCD display backlight:
Timeout, On
Level, Dim Level.
•
Language
–
press and rotate the
Volume/Select
control (9) to select the following languages your radio will
operate in:
English, Nederlands, Deutsch, Italiano.
•
Factory Reset
–
press and rotate the
Volume/Select
control (9) to
select ‘
Yes
’ or ‘
No
’ to restore
the radio to
factory settings.
•
Software Update
–
press and rotate the
Volume/Select
control (9) to
select ‘
Yes
’ or ‘
No
’ to
update the
internal software.
•
Software Version
–
select to show current internal software version.
Operating Instructions
–
Using the FM Radio
Listening to the FM Radio
1.
Ensure the
On/Off Switch
(20) on the rear of the radio is in the on position and the
Telescopic
Aerial
(14) is fully extended.
2.
Ensure the radio has batteries inserted or has the
Mains Adaptor
(18) connected as described
above.
3.
Press the
Standby/Mode
button (1) on the front panel until the radio powers up.
4.
Briefly press the
Standby/Mode
button (1) to enter the FM radio mode.
5.
Press the
Previous
(10) or
Next
(8) buttons to tune up and down the FM radio band. Holding
either of the buttons down will search and stop at the next FM radio station.
NB
the radio tunes in 0.05MHz steps.
6.
Adjust the volume using the
VOLUME
control (9).
Saving up to 10 FM radio stations using the preset function
1.
First tune the radio to the desired station as described above.
2.
Press and hold the
Preset
button (4) to enter Preset save mode.
3.
Press the
Previous
(10) or
Next
(8) buttons or rotate the
Volume/Select
control (9) to scroll through
the presets.
NB
if a preset is empty and there is no station saved the preset will show as ‘
(Empty)
’.
4.
After selecting the desired preset press the
Volume/Select
control (9) to save the tuned station into
the preset selected
–
the
LCD Display
(3) will show ‘
Preset x saved
’ to confirm.
