Daewoo AKD-80C, Руководство по обслуживанию

Страница: 7 / 29

DAEWOO
4.INSTALLATION METHOD
(HOW TO INSTALL THE VEHICLE)
5.PREPARATIONS
- 6 -
Should be determined before the unit install under
carpet.
Adjust the installation bracket with bolts to suit the place
of installation.
1.Remove the floor carpet and decide on the place to
install.
2.Remove the separator of the cushion rubber that is
attached to the installation bracket with bolt and install
accordingly.
3.Align the unit with the bolts and secure it with the wing
nuts.
1.USAGE OF MAGAZINE (To load the discs)
Load the discs with the labels facing upwards, as
shown in the diagram.
2.TO LOAD THE MAGAZINE
Slide the sliding door to the right until it is completely
latched on.
Load the magazine in the direction as shown in the
diagram. push it in until is locked into the unit.
After the magazine has been loaded, close the sliding
door.
(If not close sliding door, Dirt or dust entering it will
cause damage)
3.TO REMOVE THE MAGAZINE
Open the sliding door and depress the eject button.
Remove the magazine when it has been ejected.
Close the sliding door.
Notes on handling the optical pick-up block or base unit
1.The laser diode in the optical pick-up block may suffer
electrostatic breakdown because of the potential
difference generated by the charged electrostatic
load,etc. on clothing and the human body.
2.During repair, pay attention to electrostatic breakdown
and also use the procedure in the printed matter which
is included in the repair parts.
3.The flexible board is easily damaged and should be
handled with care.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.