Daewoo 901D, Руководство по обслуживанию

Страница: 8 / 67

6
Diode Removal/Replacement
1. Remove defective diode by clipping its leads as close as possible to diode body.
2. Bend the two remaining leads perpendicularly to the circuit board.
3. Observing diode polarity, wrap each lead out of the new diode around the corresponding lead on the circuit
board.
4. Securely crimp each connection and solder it.
5. Inspect the solder joints of the two “original” leads on the circuit board copper side. If they are not shiny, reheat
them and apply additional solder if necessary.
TECHNICAL INFORMATION
Picture Tube Type : 19-inch, Flat Square Tube type
(18-inch, viewing area)
Dot Pitch : 0.26mm
Face Treatment : Anti-reflect / Anti-static
Video Input Signal : R.G.B Analog
Pixel Clock : 203 MHz
Input Sync : TTL, separate negative / positive
H+V Sync. on Green, negative
Composite H+V Sync. negative / positive
Scan Frequency Horizontal : 30-95 KHz(automatic)
Vertical : 50-160 Hz(automatic)
Max. Resolution 1600 dots X 1200 lines (at 75Hz)
Power Source Free Voltage (100-240 Vac, 50/60Hz)
Display Area Standard Display Area : 350mm(H)X262mm(V)
Full Screen Size : 365.8mm(H)X274.3mm(V)
Power Consumption Max. 130W
Dimension 466(W)X474.5(H)X482(D)mm
(set with stand)
Weight (Net/Gross) 23.5/27.5 kg
Operating Environment Temperature : 10~40°C/50~104°F
Relative Humidity : 8~80%
Storage Environment Temperature : -20~45°C/-4~113°F
Relative Humidity : 5~90%
State Recovery Time Power LED
On None Green
Stand-by
3 seconds
Green : 1 second
Suspend Amber : 0.5 second
Off - Amber