47
Time Lapse Video Cassette Recorder
46
Time Lapse Video Cassette Recorder
Specifications
General Specifications
Recording method
Dual-azimuth 4-head rotating helical scanning system
Audio recording
In 2, 6, 18 and 30 hour modes
Tape speed
33.35 m/sec (2 hour mode)
Specified video cassette tape
VHS 1/2 inch video cassette tape
Recording/playback time
2, 6, 18, 30, 48, 72, 96, 120, 168, 240, 360, 480, 720,
960 hours (when using T-120 tape)
Fast forward/rewind time
Within 3 minutes (when using T-120 tape)
Television system
NTSC color TV system
Video
Recording method
Luminance signal : FM recording
~0.8V Down-converted subcarrier phase shift system
Video input
1 Vp-p, BNC, 75
Ω
, unbalanced
Video output
1 Vp-p, BNC, 75
Ω
, unbalanced
Horizontal resolution
Black & white mode
350 lines
Color mode
300 lines
Audio
Input
RCA pin jack more than 47k
Ω
-8.8dBm, unbalanced
Output
RCA pin jack less than 1.5k
Ω
-7.8dBm, unbalanced
Microphone input
-60 dBs, 3.5mm mini jack, 10k
Ω
, unbalanced
Connectors
Alarm input
DC 4~5V(Open), DC 0~0.8V(Closed) / 5.7k
Ω
Alarm output
DC 4~5V(H), DC 0~0.8V(L) / 1k
Ω
Panic input
DC 4~5V(Open), DC 0~0.8V(Closed) / 5.7k
Ω
End output
DC 4~5V(H), DC 0~0.8V(L) / 1k
Ω
Warning output
DC 4~5V(H), DC 0~0.8V(L) / 1k
Ω
Series input
DC 4~5V(H), DC 0~0.8V(L) / 5.7k
Ω
Series output
DC 4~5V(H), DC 0~0.8V(L) / 1k
Ω
Switch output
DC 4~5V(H), DC 0~0.8V(L) / 1k
Ω
Common
0V( GND)
Other Specifications
Operating temperature range
41ºF - 104ºF
Operating humidity range
80% or less
Power requirements
DC 12V, 3.3A
Power consumption
15W
Dimensions
240(W) x 90(H) x 275(D)
Weight
approximately 3.6kg
NOTE : The specifications and external appearance of this unit are subject to change
without notice.
Periodic Inspection and Maintenance
Periodic inspection and maintenance should be referred
to your dealer. If there is noise in the playback picture,
and it cannot be corrected using the tracking
control, it may indicate that the video heads need
cleaning. The video heads should be cleaned and
inspected every 1,000 hours. The video heads usage can
be checked using initial menu, running time.
System Down
If the unit does not function at all, try the following.
1
Unplug the power cord then plug it back in.
2
Reset the memory. (Press the RESET button. Under
normal conditions, do not touch the RESET button.)
3
If the problem is not corrected after performing
steps 1 and 2, consult your dealer.
✔
• Press the RESET button for
more than 0.5 seconds to
perform the reset. Running
Time will not be reset.
