Daewoo 719B, Руководство по обслуживанию

Страница: 10 / 52

Pin Signal
1 Red
2 Green
3 Blue
4
GND
5 GND
6 GND - Red
7 GND - Green
8 GND - Blue
9 +5Vdc
10 GND - H.Sync
11 GND - V.Sync
12 Bi-directional Data (SDA)
13 Horizontal Sync
14 Vertical Sync (VCLK)
15 Data Clock (SCL)
8
PIN CONNECTOR
• Degaussing is always required when adjusting purity or convergence.
• The white balance adjustment has been done by a color analyzer in factroy. The adjustment procedure,
described in the service manual is made by a visual check.
• Allow 20 minutes warm-up time for the display before checking or adjusting only electrical
specification or function.
• Reform the leadwire after any repair work.
◆
Caution For Servicing
• In case of servicing or replacing CRT, high voltage sometimes remains in the anode of the CRT.
Completely discharge high voltage before servicing or replacing CRT to prevent a shock to the
serviceman.
Arrangement of 15-pin D-sub connector
CAUTIONS FOR ADJUSTMENT AND REPAIR
1
6
15
10