ENG
11
Date setting
On hook status, press
SET/ST/÷
key, the current LCD displays “SET 1 DATE”, press
SET/ST/÷
key
to confirm. Enter the date / time settings, year display blinks, press the
UP/ -
,
DOWN/+
key to
change, and then press
SET/ST/÷
key to enter the month setting, similarly set the year, press
SET/ST/÷
keys to modify the day, hour and minute in order.
5-digit local code setting
On hook status, press
SET/ST/÷
key, the current LCD display “SET 1 DATE”, press
UP/ -
,
DOWN/+
keys to change the LCD prompts “SET 2 CODE”, then press the
SET/ST/÷
key to confirm, LCD will
show “CODE ----”, enter the area code is set, the first “-” flashes (if set area code, the display setting
area code, area code the first number flashing ). Press
UP/ -
,
DOWN/+
keys to set or modify 0-9,
press
SET/ST/÷
key to enter the second set, and so on.
1-digit out code setting
On hook status, press
SET/ST/÷
key, the current LCD display “SET 1 DATE”, press
UP/ -
,
DOWN/+
keys to change the LCD prompts “SET 3 PCODE”, press
SET/ST/÷
key to confirm, LCD will show
“PCODE-”, “-” Flashes (if set out local code, the display has been set out code) Press
UP/ -
,
DOWN/+
key, it can be set 0-9, after finished press
SET/ST/÷
key to confirm (After setting out code in
callback calls, when pre-dial, if the number is greater than equal to 6 and the first and outgoing
code is different, the phone will automatically add the digit or digits. The Callback Outgoing not
consider adding the digit or digits.)
Flash time setting
On hook status, press
SET/ST/÷
key, the current LCD display “SET 1 DATE”, press
UP/ -
,
DOWN/+
keys to change the LCD prompts “SET 6 FLASH”, press
SET/ST/÷
button to confirm, display “FLASH
4 1000”, a total of four groups, press
UP/ -
,
DOWN/+
sure to select one group, the corresponding
keys correspond FLASH (can be set respectively 110MS 300 MS 600MS 1000MS).
LCD brightness contrast adjustment
On hook operation, press
FLASH
key, LCD displays “
LCD 3
”, Continuously press the [FLASH] key
to adjust the LCD contrast, is divided into 5 levels, (LCD default contrast 3).
BACK key
On hook status, press
UP/ -
,
DOWN/+
or
OUT/X
to enter into incoming /outgoing query the
status, LCD display the caller’s number, the date and time information. After checking of the
incoming / outgoing number, press
BACK
key, the incoming / outgoing numbers can be called
back.
Check incoming calls
On hook status, press
UP/-
or
DOWN/+
key to check incoming calls. To re-dial the number
checked, press
BACK
key.
Check outgoing calls
On hook status, press
OUT/ X
key to cycle check the outgoing calls’ numbers and time. To re-dial
the number checked, press
BACK
key.
