Carrying
Carry the appliance by touching the bottom.
Do not carry by touching the door or door handle.
Do not carry the appliance transversely or reversely.
The appliance has 2 wheels on the back.
During moving, uplift the front side and move the
appliance by 2 wheels on the back.
The incline angle should be less than 45
.
Installing
Install the appliance in a dry and ventilated room.
The below distances should be required.
from the side panels to wall: 10cm minimum.
from the back to wall: 10cm minimum.
from the top to wall or ceiling: 30cm minimum.
Adjust the feet
There are 2 feet on the front bottom.
Put the appliance on sturdy & horizontal ground.
Adjust the feet screws by wrench (See the picture) to
vertical and stable position.
Make sure the feet screws touching ground wholly to
avoid shock and noise.
Carrying and installing the appliance
Product Introduction
4
On the thermostat knob, there are positions from OFF to MAX.
(Note: Position off - max identify refrigerations, not temperatures.)
Position WARM = Highest setting temperature
Position MAX = Lowest setting temperature (keep cooling all the time)
Position OFF = The compressor stop working
Switching on
At the first time of switching on, rotate the thermostat knob to position MAX
and close the door. After 2 hours, rotate the thermostat knob into normal
working positions ( WARM COLD ).
From position WARM to MAX, the compartment temperature is from high to low.
Thermostat
Switching on and temperature control
Usage
5
For normal working, set position WARM COLD.
For fast freezing or ice making, set position COLD MAX.
In different seasons, choose different levels for good
freezing effect.
For summer, set position WARM COLD.
For winter, set position COLD MAX.
Temperature control
Remove all the packing materials include polyfoams and tapes.
Preparation before Using
Usage
Connecting the appliance
The rated voltage is 220-240V. The rated frequency is 50Hz.
The working voltage range is from 180V to 242V.
The socket and its cable should stand more than 10A
current.
The socket must be fused with a 10A fuse or higher.
Check the accessories and documents according to the
packing list
.
Before switching on the appliance for the first time ,clean the interior.
After installing the appliance, wait for 12 hours at least before switching
on the appliance. During transportation the oil in the compressor may have
flowed into the refrigeration system.
Thermostat knob
MAX
OF
F
C
O
L
D
W
A
R
M
TEMPERATURE
CONTROL
Содержание Daema FR-208
Страница 7: ......
