1. Connect camera and TDM08-SDI-TX’s VIDEO IN using coax cable.
- If non PoC Camera: Supply the individual power to camera. To control the camera’s PTZ
and/or OSD, connect the RS485 line between camera and TDM08-SDI-TX.
- If PoC Camera: Don’t require any other cables except COAX cable.
(non PoC DVR can use PoC camera because TDM08-SDI-TX is PoC device.)
2. Connect TDM08-SDI-TX and DVR using coax cable.
- Usable TDM channels are determined according to DVR models. Please refer the DVR’s
manual for DVR’s TDM configuration and usage.
- Please use repeater to expand the transmission distance.
3. Controlling camera can be performed under below connection conditions.
- If non PoC DVR: PS101P must be used and RS485 lines must be connected between DVR
and PS101P.
- If PoC DVR: Only coax cable connection is required to control camera. If you want to use
repeater to expand transmission distance, please uses RP102P.
4. Set the CoC OUT switch as COAX.
※ To control camera, the camera’s (RS485/CoC) ID and the channel number of VIDEO-IN must
be the same. (ex: The ID of camera connected to ch3 must be 3.)