Dimension (unit: mm)
Description
Front
Item
Description
1
OPT LINK
ON when Optic cable is connected.
PWR
ON when the power is supplied.
VIDEO IN
ON when each camera video is input.
PoC OUT
ON when TDM08-SDI-TX supplies the power to each PoC camera.
2 CoC OUT SW
Select the port for CoC (OPT(FIBER) or COAX)
3
CONFIG SW
OFF: Normal Mode
ON: CAMERA CONFIG Mode
BAUD SW
Select BAUDRATE. (57600 / 9600)
4
UP/DOWN/LEFT/
RIGHT/ENTER
OSD control can be performed using these keys under CAMERA CONFIG
mode. Only CH 1 can be used as CAMERA CONFIG mode.
5 CAM ID
Set the switches to the same ID number as the RS485 (or CoC) ID of
camera connected to CH1 under CAMERA CONFIG mode.