DAELIM S4 50cc, Руководство по обслуживанию

Страница: 135 / 188

BRAKE BLEEDER
FRONT WHEEL / FRONT BRAKE / FRONT FORK / STEERING STEM
NOTE
• Do not release the brake lever until the bleeder
valve has been closed.
●
Remove the master cylinder cup cap.
●
Remove the master cylinder cup cap, diaphragm
plate, and diaphragm from the master cylinder.
Connect the bleeder hose to the bleeder valve.
Loosen the bleeder valve, and pump the brake lever
repeatedly.
●
When there is no more fluid flowing out of the
bleeder valve. Stop pumping the brake lever.
AIR BLEEDING
<When the brake bleeder is available>
●
Remove the master cylinder cup cap, diaphragm
plate, and diaphragm from the master cylinder.
Connect the bleeder hose to the bleeder valve.
Loosen the bleeder valve, and pump the brake lever
repeatedly.
● When there is no more fluid flowing out of the
bleeder valve. Stop pumping the brake lever.
NOTE
•
Check the fluid level often, and replenish fluid if
the amount of fluid is reduced to the lower level.
•
Read the user’s manual carefully prior to
disassembling or using the brake bleeder.
•
Protect the bleeder valve with tape to prevent air
from entering the bleeder valve.
● Repeat the above procedures until no air bubbles
appear in the bleeder hose.
● Squeeze the bleeder valve and operate the brake
lever to check the ingress of air.
<When the brake bleeder is not available>
●
Fill the brake fluid up to the upper limit line.
●
Connect the transparent bleeder hose to the bleeder
valve and place the other end of hose in a container.
①
Squeeze the brake lever, then open the bleeder valve
1/2 turn, and close the valve.