DAELIM Roadwin 250R FI VJF125, Руководство по обслуживанию

Страница: 9 / 288

1-6
GENERAL INFORMATION
•
Insert the lock of the coupler until the lock is fully
secured.
•
Turn off the main switch before connecting/dis-
connecting.
•
Release the lock to disconnect the lock of the coupler.
•
The lock of the coupler has two types according to
releasing method(press type and pull type) so release it
properly according to the shape.
- Typical releasing method of the coupler is illustrated in
the following.
•
When disconnecting the coupler, disconnect it while
holding the coupler body. Pull while holding the wire
harness cord and do not remove the coupler connection.
•
Release the lock by inserting the coupler slightly and
then narrowing connection to remove the coupler.
•
Pay attention not to damage the vinyl cover of the
coupler.
•
Check to see if there is bended terminal and secure it to
avoid disconnecting.
•
If the wire harness coating is damaged, repair by
winding vinyl tape or replace it.
•
Prior to connecting the connector, make sure that the
cover is not damaged and the mess terminal is not
opened.