background image

Read user's manual carefully.

Conduct maintenance checks prior to operation.

Always maintain motorcycle in clean status and carry out
specified maintenance checks.

Make sure to stop engine and stay away from fire when
fueling.

Exhaust gas contains harmful substance such as carbon
monoxide. Start engine in well-ventilated places.

Always make sure to wear helmet for safety. Wear gloves and
safety goggles.

Do not wear uniforms which might hinder operation. It is
dangerous if the uniform is caught by brake lever or by the
rotating part of drive chain.

Do not wear slippers which might obstruct brake operation or
transmission gear operation.

Many automobile/motorcycle accidents happen because the
automobile driver does not “see” the motorcyclist.
Make yourself conspicuous to help avoid the accident that
wasn’t your fault :
- Wear bright or reflective clothing.
- Don’t ride in another motorist’s “blind spot”.

5

PRIOR TO STARTING VEHICLE

CORRECT ATTIRE

WARNING

Not wearing a helmet increases the chance of serious
injury or death in a crash.

Be sure you and your passenger always wear a helmet,
eye protection and other protective apparel when you
ride.

Содержание ROADWIN 125 FI





































































Отзывы: