DAELIM ROADWIN 125 FI, Руководство пользователя, Страница: 46 / 68

The engine must be at normal operating
temperature for accurate idle speed
adjustment. Ten minutes of stop-and-go
riding is sufficient.
1. Warm up the engine, shift to neutral
and place the motorcycle on its stand.
2. Adjust idle speed with the throttle stop
screw.
IDLE SPEED (IN NEUTRAL) :
1,600
± ±
100 min -1 (rpm)
● Erect main stand and place motorcycle
in upright position on level ground.
●
Check the spring for damage or loss of
tension and the side stand assembly for
freedom of movement.
● Check the side stand ignition cut-off
system;
①
Put the side stand up.
②
Start the engine.
③ Lower the side stand. The engine
should stop as you put the side stand
down.
●
If the side stand system does not
operate as described, inspect it in the
closest authorized repair center.
44
IDLE SPEED
CAUTION
●
Make sure that the engine is fully
warmed up before adjusting the idle
speed. Improper adjustment can
result in increased engine wear.
THROTTLE STOP SCREW
SIDE STAND
SIDE STAND SPRING SIDE STAND SWITCH