background image

24

Self inspect the vehicle and have regular
maintenance inspections for increased
safety and the prevention of accidents.
Regular maintenance inspections should
be performed even if the vehicle has not
been used for a long period of time.

Self inspections before operation should
be performed on a daily basis prior to
operating the vehicle.

Inspections of concerned Area

Fuel check

Tire inspection

Brake inspection

Engine oil check

Lights and winker inspection

Back mirror inspection

Fuel leak inspection

License plate inspection

Throttle grip inspection.

Check areas which caused for concern
when last operating the vehicle.

If happened, contact authorized
maintenance shops for necessary
inspection and repairs.

INSPECTION OF CONCERNED AREA

SELF INSPECTIONS BEFORE OPERATION

CAUTION

Observe safety rules when conducting
inspections.

Exhaust gas contains harmful
substance such as carbon mono-xide.
Do not carry out inspections on
vehicle in closed places, or in poorly
ventilated places, with engine
running.

Conduct inspections on flat, solid
ground with the stand erected.

Be  careful of burns when conducting
inspections immediately after engine
is stopped because the engine and
muffler are hot.

Stop engine and remove the key prior
to the vehicle maintenance service.

Use appropriate types of tools.

If you are unable to correct trouble
even after you make adjustment or
correction, contact authorized
maintenance shops, dealers or
designated repair shops for necessary
inspection and repairs.

Содержание CORDI -

































































Отзывы: