DAELIM BESBI SC125 -, Руководство по обслуживанию

Страница: 98 / 188

Using a 55 degree cutter, remove the bottom of the
old seat.
Using a 45 degree cutter, cut the seat to the proper
width.
If the contact area is too high on the valve, the seat
must be lowered using a 37 degree flat cutter.
Refinish the seat to specifications, using a 45 degree
finish cutter.
If the contact area is too low on the valve, the seat must
be raised using a 55 degree inner cutter.
Refinish the seat to specifications, using a 45 degree
finish cutter.
9-10
CYLINDER HEAD / VALVES