DAELIM B-BONE, Руководство по обслуживанию

Страница: 88 / 246

5-36
EMS(Engine Management System)
MEASUREMENT PVA
●
Disconnect the ACG (L/G) connector.
●
Connect the (+)cord of PVA tester to the green
terminal or ground wire.
●
Connect the (-)cord of PVA tester to the blue
terminal.
● Crank the engine with the starter motor and
measure the peak voltage of crank position
sensor coil.
●
HIGHEST VOLTAGE : 1.5V Over.
●
TOOL : PVA Multy tester.
●
Assembly is the reverse order of removal.
MEASUREMENT RESISTANCE
●
Remove the seat.
●
Remove the LH. side cover.
●
Disconnect the ACG coupler and (L/G)
connector.
●
Measure the resistance between G and L.
● STANDARD : 80~150 Ω (20 ℃ )
CHECKING OF CKP(Crank Position
Sensor)
● Check the fly wheel.
●
Fly wheel for the EMS system have 10 spots
on the fly wheel protrusion. It is different with
carburetor type.
●
Check the mark or contamination on the
protrusion.
ASSEMBLY
●
Assembly is the reverse order of removal.
!
CAUTION
△
●
When replace the fly wheel, check the 10 spots
of protrusion part.