Daedong KIOTI PX1053, Руководство пользователя

Страница: 222 / 256

px9530 / px1053 / px1153 / px1303
7
-
38
(1) radiator cap (2) reservoir Tank
(a) full (B) low
6. install the radiator cap securely.
7. start and operate the engine for
few minutes.
8. stop the engine and let it cool.
9. Drain water and clears.
10. add coolant and water, run for a
few minutes and allow to come
up to temperature.
11. stop engine and let cool.
12. check coolant level of reservoir
tank and radiator. add coolant if
necessary.
1
2
A
B
1
2
A
B
Tg1o765B
Coolant capacity [U.S.gal. (L)]
px9530 / 1053 / 1153 3.7 (14)
px1303 4.6 (17.6 )
To avoid accidents :
Do not remove the radia-
tor cap while the coolant is
hot. you can get burnt by hot
steam. Make sure to remove
it after the coolant is cooled
down enough.
Even though the coolant is
cooled down, turn the cap to
its first stop and then wait un -
til it is depressurized before
removing the cap completely.
•
•
CAUTION
Do not start engine without
coolant.
Use clean, fresh water and
anti-freeze to fill the radiator
and reservoir tank.
when the anti-freeze is mixed
with water, the anti-freeze mix -
ing ratio must be no less than
50% mixture of water and anti-
freeze.
Securely tighten radiator cap.
If the cap is loose or improp
-
erly fitted, water may leak out
and the engine could over-
heat.
If the radiator cap has to be
removed, follow the caution
above and securely retighten
the cap.
If the coolant leaks, contact
your local kIOTI Dealer.
•
•
•
•
•
•
•
IMPORTANT
TG120-수출향-US-07.indd 38 2017-10-26 오후 1:20:51