Daedong KIOTI DK35SE, Руководство пользователя

Страница: 137 / 221

5
-28
DK35(CH)SE/DK40(CH)SE/DK45(C)HSE
CONNECTING AND DISCONNECT-
ING IMPLEMENT HYDRAULIC HOSE
CONNECTION
1. Make sure to stop the engine be-
fore connecting it.
2. Remove any foreign material
around the male and female
couplers. If foreign material enters
the hydraulic components, it can
lead to malfunction of the system.
3. Move the double acting valve lever
forward and backward for 4 to 5
times to release the pressure in the
hydraulic line of the tractor.
Otherwise, it is hard to connect the
couplers, and hydraulic fluid can be
sprayed from the line and get in to
your eyes while connecting them.
4. Open the dust-proof cover of the
female coupler of the tractor and
insert the male coupler of the
implement. A clicking sound is
heard when the couplers are
engaged.
5. Pull the hydraulic hose of the imple-
ment to check that the couplers are
properly connected.
6. Start the ngine and check the oper-
ating status and leakage.
DISCONNECTION
1. Make sure to stop the engine be-
fore disconnecting it.
2. Remove any foreign material
around the couplers.
3. Release any residual pressure in
the hydraulic hoses of the imple-
ment and tractor by operating the
double acting valve lever 4 to 5
times.
4. Keep the implement balanced by re-
moving any load applied (lowering
it onto the ground, for example). If
disconnecting the hose while outer
load is applied to the implement, it
is hard to connect the implement in
the future.
5. Remove the male coupler by push-
ing the female coupler boss of the
tractor backward.
It is recommended to use the
double acting cylinder instead
of the single acting cylinder if
the implement will be operated
frequently and continuously.If
using the single acting cylinder
too frequently or for an ex-
tended period of time, the hy-
draulic fluid can be overheated,
resulting in deterioration of the
hydraulic parts’ durability as the
main relief valve opens at cylin-
der contraction.
IMPORTANT
3. When the cylinder is contracted, the
hydraulic fluid returned from the cyl-
inder is drained to the transmission
through the draining circuit as the
operating lever is operated to the
opposite direction from the expan-
sion position.