Daedong EX50-SA Скачать руководство пользователя страница 36

Страница: 36 / 196

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU

• Check for correct coupling between

tow hook and trailer. See the Towing

Attachments section.

• Use ballast weight as recommend

ed. NEVER add more ballast to

compensate a higher load than al-

lowed. Reduce load.

• Keep work surfaces and engine

compartments clean. • Before

cleaning the machine, always lower

implements to the ground, engage

the first gear, engage the parking

brake, turn the engine off and re-

move the key.

• Always use specific personal safety

devices for each service operation.

• Clean steps, pedals and floor. Re

move grease or oil. Brush away

dust or mud. In winter, scrape away

snow and ice. Remember - slippery

surfaces are dangerous.

• Avoid using petrol, paraffin, paint

thinner etc. when cleaning plastic

parts, e.g.; console, instrument

cluster, monitors and gauges etc.

Use ONLY water, mild soap and

a soft cloth when you clean these

parts.Using petrol, paraffin, paint

thinner etc., will cause cracking

or deformation of the part being

cleaned.

• Remove and put away any tools,

buckets, chains and hooks.

CLEANING THE TRACTOR

TE150 (EX50, EX55)-��-01.indd 24

2019-03-19 �� 2:45:47

Содержание EX50-SA





































































































































































































Результаты поиска

Содержание EX50-SA

Отзывы:

Похожие инструкции для EX50-SA

Бренды по названию

Популярные бренды

Daedong EX50-SA, Руководство пользователя

Результаты поиска

Содержание EX50-SA

Отзывы:

Похожие инструкции для EX50-SA

Бренды по названию

Популярные бренды