Daedong EX50-SA Скачать руководство пользователя страница 111

Страница: 111 / 196

OPERATION



Make sure that the coupling

device of brake pedal and dif-

ferential lock pedal is released.



Do not disengage the clutch or

put the shift lever in the neu-

tral position on a slope. Other-

wise, the tractor may become

inoperable.



Before entering a steep slope,

move the shift lever down to

a proper gear and never try

to move the shift lever on a

slope. A serious accident can

occur.

WARNING

THE CAUTIONS WHEN COMING IN AND OUT OF PAVED ROAD

1. Make sure that the left and right

pedal are connected.

2. Go in and out of the cultivated land

at a right angle.

3. Enter and exit the field by driving

the tractor at a right angle to the

bank.

4. When going up, lower the imple-

ment not to let the front wheel rise.

Raise the implement as soon as

the front and rear wheels are over

the bank.

C56O502A

5. It is recommended to use the 4WD

and drive backward when moving

onto a bank.

TE150 (EX50, EX55)-��-05.indd 19

2019-03-19 �� 7:03:17

Содержание EX50-SA





































































































































































































Результаты поиска

Содержание EX50-SA

Отзывы:

Бренды по названию

Популярные бренды

Daedong EX50-SA, Руководство пользователя

Результаты поиска

Содержание EX50-SA

Отзывы:

Бренды по названию

Популярные бренды