Daedalus Magpie V2, Руководство пользователя

Страница: 25 / 28

23
Our wheels are designed with high grade, sealed roller bearings that
are greased from the factory and will never require oil or any other
attention. No parts of our wheels require oil or grease of any kind.
If you notice your achievable tension being less than before, the Kevlar
tension belt may need to be cleaned of aluminum oxide buildup.
Inspect the area of the belt that contacts the aluminum drum. If there
is a large buildup of dark powder, you can freshen it by gently brushing
the belt with your thumb to remove most of the alumina. The contact
area of the Kevlar may show some “seasoning,” in the form of being a
little fuzzy. This is to be expected and should not change the tension
profile. The provided belt material is 1.5 mm Kevlar (yellow). You may
experiment with other Kevlar braids from 1.0 to 3 mm for a softer
or firmer tension profile. You are welcome to try other materials like
cotton, nylon, or silk.
To clean your e-spinner, please use a lint-free cloth. If needed,
dampen the cloth with water only. Please do not use detergents or
cleaners. Canned air is recommended for keeping crevices clean of
fiber and yarn debris, but be certain to keep the can upright while
spraying to avoid damaging the surface.
If you live in a high humidity area, you may notice some slight
tarnishing on the maiden bearing. This can be cleaned with a jewelry
polishing cloth.
Please inspect your rubber o-rings for any cracks, as dry rot can
happen in extremely dry climates. They can be protected with any oil
and are easily replaceable with the spares provided in your kit.
If you need any assisance with your wheel, please do not hesitate to
reach out to support@daedalusspinningwheels.com
Maintenance